Real Exam Questions HPE2-T37 Dumps Exam Questions in here [Aug-2023]
Get Latest Aug-2023 Conduct effective penetration tests using HPE2-T37
NEW QUESTION # 26
Which statement about RoCE network restrictions is true?
- A. RoCE networks cannot be configured when Virtual Connect modules are used.
- B. RoCE networks require Virtual Connect SE 32Gb FC Modules.
- C. RoCE networks are not supported with HPE BladeSystem
- D. RoCE networks are supported only when PVLANs are enabled.
Answer: C
NEW QUESTION # 27
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks have Private Network' selected, which hides them from Compute Modules.
- B. The other networks are configured with a purpose other than General or Management.
- C. The other networks are not added to the Logical Interconnect Group configuration.
- D. The other networks are not configured with the required Smart Link parameter.
Answer: A
NEW QUESTION # 28
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. The maximum supported number of the internal networks for logical interconnect is configured.
Answer: B
NEW QUESTION # 29
Which statement about a server profile for an Apollo system is true?
- A. Enclosure Group Is automatically selected
- B. UEFI optimized is the only available boot mode
- C. Virtual WWNs and MAC addresses can be defined
- D. Fibre Channel connections can be defined
Answer: D
NEW QUESTION # 30
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION # 31
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools. For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be removed from HPE OneView using a PowerShell script.
- B. The storage pool state should be changed to discovered using HPE OneView.
- C. The storage pool should be disabled using the array management tool.
- D. The storage pool should be marked as read-only using HPE OneView.
Answer: C
NEW QUESTION # 32
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION # 33
You Just downloaded a logical enclosure support dump, but you cannot extract files from the downloaded support dump. What is a likely cause of the issue?
- A. The support dump does not have a valid HPE OneView certificate
- B. The backup user role must be used to extract the support dump
- C. The support dump is encrypted and cannot be unpacked
- D. The support dump for Logical Enclosure can be analyzed only using special tool.
Answer: D
NEW QUESTION # 34
Which statement about the volume template is true?
- A. Users will be able to change sharing type and volume capacity
- B. A volume created using this template mil not support snapshots
- C. Users will be able to select storage pool during volume creation
- D. A volume created using this template will not support deduplication
Answer: A
NEW QUESTION # 35
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
NEW QUESTION # 36
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- B. The firmware repository service must be restarted using maintenance connection.
- C. The firmware repository is not defined within firmware compliance report.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: B
NEW QUESTION # 37
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?
- A. The server is powered off
- B. The server does not have an HPE OneView license applied
- C. The server is powered on
- D. You tried to add additional connection above the limit
Answer: C
NEW QUESTION # 38
For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.
Answer:
Explanation:
NEW QUESTION # 39
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- B. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- C. The maximum supported number of the internal networks for logical interconnect is configured.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
Answer: A
NEW QUESTION # 40
What is the best practice when deploying an HPE OneView appliance?
- A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- B. Deploy two HPE OneView appliances and configure them in HA mode.
- C. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- D. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
Answer: C
NEW QUESTION # 41
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether there are at least two Fibre Channel networks defined in HPE OneView.
- B. whether the appropriate license for HPE Primera Is available in HPE OneView.
- C. whether array management using HPE OneView is enabled in SSMC.
- D. whether WSAPI service is enabled on HPE Primera array.
Answer: D
NEW QUESTION # 42
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As a physical appliance based on HPE ProLiant 360 Gen 10.
- B. As a virtual appliance running on the supported hypervisor.
- C. As an application running on the server with Windows system.
- D. As an application running on the server with CentOS Linux system
Answer: B
NEW QUESTION # 43
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Maintenance console support dump
- B. Appliance support dump
- C. Enclosure group support dump
- D. Logical enclosure support dump
- E. Firmware deployment support dump
Answer: B,D
NEW QUESTION # 44
......
Authentic Best resources for HPE2-T37 Online Practice Exam: https://realpdf.pass4suresvce.com/HPE2-T37-pass4sure-vce-dumps.html