Pass Your H12-811_V1.0 Exam Easily - Real H12-811_V1.0 Practice Dump Updated Apr 21, 2024
2024 Realistic Verified Free Huawei H12-811_V1.0 Exam Questions
The HCIA-Datacom V1.0 certification exam covers a wide range of topics related to data communication technologies, such as network architecture and design, network protocols, network devices, and network security. Candidates will be required to demonstrate their knowledge and understanding of these topics through a series of multiple-choice questions and practical exercises.
Huawei H12-811_V1.0 (HCIA-Datacom V1.0) certification exam is designed to test the knowledge and skills of professionals in the field of data communications. HCIA-Datacom V1.0 certification covers a wide range of topics related to data communication technologies and their applications. Professionals who pass this certification exam demonstrate their expertise in planning, designing, implementing, and troubleshooting data communication networks.
NEW QUESTION # 23
The number of VLANs that can be created using the commands "vlan batch1020 and "vlan batch10to20" respectively is ()
- A. 11 and 2
- B. 2 and 2
- C. 2 and 11
- D. 11 and 11
Answer: C
NEW QUESTION # 24
Which of the following IPv6 addresses is a global unicast address?
- A. SNMPv2c messages have the functions of identity verification and encryption processing.
- B. SMPv3 messages have the functions of identity verification and encryption processing
- C. SMPv2c follows the five protocol operations defined in the v1 version and adds two additional operations.
- D. SNMPy1 uses UP as the transport layer protocol, while SNMPy2c and SNMPv3 use TCP as the transport layer protocol, so the reliability is higher
Answer: B,C
NEW QUESTION # 25
Which of the following statements is correct for the ACL configured in the Telnet application? ()
- A. The device with IP address 172.16.105.5 can use Telnet service
- B. The device with P address 172.16.105.6 can use Telnet service
- C. The device with P address 172.16.105.4 can use Telnet service
- D. The device with IP address 172.16.105.3 can use Telnet service
Answer: B
NEW QUESTION # 26
Trunk port can allow multiple vlans to pass, including vlan 4096.
- A. False
- B. True
Answer: A
NEW QUESTION # 27
In the STP protocol, which of the following factors will affect the election of the root switch? ()*
- A. IP address of the switch
- B. Switch interface ID
- C. Switch priority
- D. MAC address of the switch
- E. Switch interface bandwidth
Answer: C,D
NEW QUESTION # 28
What is the value of the Type field in the RStp configuration BPDU message? ()
- A. 0x00
- B. 0x03
- C. 0x01
- D. 0x02
Answer: D
NEW QUESTION # 29
What is the role of link aggregation? ()*
- A. Achieve load sharing
- B. Improve network reliability
- C. Increase bandwidth
- D. Facilitate analysis of data
Answer: A,B,C
NEW QUESTION # 30
If the network address of a network is 10.1.1.0/30, what is its broadcast address? ()
- A. 10.1.1.3
- B. 10.1.1.1
- C. 10.1.1.4
- D. 10.1.1.2
Answer: A
NEW QUESTION # 31
On the VRP platform, the default protocol priority of routes in the direct route, static route, RIP.OSPF area, from high to low, is ()
- A. Direct route. RIP. Static route. OSPF
- B. Direct route.Static route.RIP.OSPF
- C. Direct route. OSPF. RIP. Static route
- D. Direct route. OSPF. Static route. RIP
Answer: D
NEW QUESTION # 32
On Huawei switches, you can use the vlan batch command to create multiple VLANs in batches, simplifying the configuration process. ()
- A. True
- B. False
Answer: A
NEW QUESTION # 33
Which of the following elements are included in the routing table? ()*
- A. Cost
- B. Nexthop
- C. Destination/mask
- D. Protocol
- E. Interface
Answer: A,B,C,D,E
NEW QUESTION # 34
Which of the following methods can read data non-blocking in Python's telnetliB.? ()
- A. telnet_reaD._very_eager
- B. telnet._read_eager
- C. telnet_read_very_lazy
- D. telnet_Read_all
Answer: B
NEW QUESTION # 35
Apply the ACL configured as follows in Telnet, only the device with the IP address of 172.16.105.2 is allowed to log in remotely. # acl number 2000 rule 5 permit source 172.16.105.2 0 #.
- A. True
- B. False
Answer: A
NEW QUESTION # 36
Which of the following is not included in AAA? ()
- A. Accounting)
- B. Audit
- C. Authentication
- D. Authorization
Answer: B
NEW QUESTION # 37
When two OSPF routers form a 2-WAY neighbor relationship, the LSDB. has been synchronized. ()
- A. False
- B. True
Answer: A
NEW QUESTION # 38
What command can be typed in the system view to switch to the user view? ()
- A. system-view
- B. quit
- C. souter
- D. user-view
Answer: B
NEW QUESTION # 39
The administrator has configured the router as shown in the figure. Then a host connected to the G1/0/0 interface of the router. What kind of IP address can be obtained through DHCP? () (Single-choice question)
- A. The host cannot get an address
- B. The IP address obtained by the host may belong to the 10.10.10.0/24 network, or it may belong to the 10.20.20.0/24 network
- C. The IP address obtained by the host belongs to the 10.10.10.0/24 network
- D. The IP address obtained by the host belongs to the 10.20.20.0/24 network
Answer: C
NEW QUESTION # 40
On the broadcast network, both DR and BDR use the multicast address 224.0.0.6 to receive link state update messages.
- A. False
- B. True
Answer: A
NEW QUESTION # 41
The mask length is 12 bits can be expressed as?
- A. 255.255.0.0
- B. 255.240.0.0
- C. 255.255.255.0
- D. 255.248.0.0
Answer: B
NEW QUESTION # 42
Two switches use manual link aggregation at the same time. The following statement is wrong. () (Single-choice question)
- A. Only switch off G0/0/2 port on switch B. The Eth-Trunk status is still UP
- B. Only switch off G0/0/1 port on switch B. The Eth-Trunk status is still UP
- C. Turn off the G0/0/1 and G0/0/2 ports on switch B. The Eth-Trunk status is down
- D. Turn off the G0/0/1 and G0/0/2 ports on switch B, and the Efh-Trunk status is still UP
Answer: D
NEW QUESTION # 43
......
H12-811_V1.0 Real Exam Questions and Answers FREE: https://realpdf.pass4suresvce.com/H12-811_V1.0-pass4sure-vce-dumps.html