Pass Huawei H35-210_V2.5 With Pass4suresVCE Exam Dumps - Updated on Jan-2022
Fully Updated H35-210_V2.5 Dumps - 100% Same Q&A In Your Real Exam
NEW QUESTION 34
After installing the sybase patch, which of the following commands can display the version information of the installed sybase patch?
- A. 1>select @@patch2>go
- B. 1>version_help2>go
- C. 1>ver_help2>go
- D. 1>select @@version2>go
Answer: D
NEW QUESTION 35
Is the following description correct? The MA5600T event level can be divided into four levels: critical, major, minor, and warning.
- A. True
- B. False
Answer: A
NEW QUESTION 36
Is the following description correct? The cells transmitted in the ATM network have two priority levels, which are distinguished by the CLP bit in the cell header. CLP=1 means high priority, and CLP=0 means low priority.
- A. False
- B. True
Answer: A
NEW QUESTION 37
Is the following description correct? The speed standards of Fast Ethernet are100Base-TX,100Base-T4with100Base-FX.
- A. True
- B. False
Answer: A
NEW QUESTION 38
Is the following description correct? MA5612 supports RF (Radio Frequency) over PON service access.
- A. True
- B. False
Answer: A
NEW QUESTION 39
OneVLANWhat kind of domain can it be regarded as?
- A. Physical area
- B. Management domain
- C. Conflict domain
- D. Broadcast domain
Answer: D
NEW QUESTION 40
Is the following description correct? MA5600T can support multiple broadband access services such as ADSL2+, SHDSL and VDSL2.
- A. True
- B. False
Answer: A
NEW QUESTION 41
Is the following description correct? VDSL2 provides uplink and downlink symmetrical/asymmetrical transmission rates on a pair of twisted pairs. The transmission distance is about 3km. The maximum downlink rate is 52M (symmetrical rate) and the maximum uplink rate is 12M (asymmetrical rate).
- A. False
- B. True
Answer: A
NEW QUESTION 42
Which of the following are common methods for locating Ethernet connection faults?
- A. View the statistics of packets sent and received by the port
- B. Ping
- C. Check the port indicator status
- D. Check the port configuration
Answer: A,B,C,D
NEW QUESTION 43
Is the following description correct? When negotiating the project acceptance test items with the customer, it is recommended to submit the product-related product acceptance manual directly to the customer, so that the customer can choose the test item by himself.
- A. False
- B. True
Answer: A
NEW QUESTION 44
Is the following description correct? The process of voice fault location can generally be divided into: troubleshooting the external device fault, locating the fault to the specific device, and locating the fault to the board.
- A. True
- B. False
Answer: A
NEW QUESTION 45
What is the smallest constituent unit in the message constituent mechanism of the H248 protocol?
- A. message
- B. command
- C. Associated context
- D. transaction
Answer: B
NEW QUESTION 46
PVM packet voice processing board, which manages and controls the narrowband user board in the UA5000 chassis. What are its main functions?
- A. Support the TDM voice signal upstream to the switch through the V5 interface
- B. Realize V5 protocol and H.248/MGCP protocol processing
- C. Support the encapsulation of TDM voice into IP packets upstream to the softswitch equipment
- D. Support encapsulating TDM voice into ATM cell upstream to softswitch equipment
Answer: A,B,C
NEW QUESTION 47
Is the following description correct? There are no restrictions on the multicast program groups that MA5600T can configure.
- A. False
- B. True
Answer: A
NEW QUESTION 48
MA5600T checks whether the currently running single board software version meets the requirements for on-site deployment. Which command is used?
- A. display language
- B. All of the above
- C. display version
- D. display board
Answer: C
NEW QUESTION 49
What is the number of ADSL2+ subbands?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 50
Is the following description correct? The simplified method of MA5600T/MA5680T GPON Internet service is optimized for the excessive number of templates and complicated configuration in the template mode, reducing user configuration workload and subsequent maintenance costs. The simplified mode currently only supports GPON FTTH scenarios. For newly-built GPON FTTH scenarios and scenarios that do not require high QoS, the simplified mode can be used for service configuration.
- A. True
- B. False
Answer: A
NEW QUESTION 51
By default, which of the following types is the queue scheduling mode on the OLT?
- A. WFQ
- B. PQ
- C. CQ
- D. WRR
Answer: B
NEW QUESTION 52
Is the following description correct? Can test engineers use SmartKit NSE2700 Inspector on site to improve the efficiency of ADSL port activation?
- A. False
- B. True
Answer: A
NEW QUESTION 53
When configuring traffic table for MA5680T, if only CIR is configured and PIR parameters are not specified, what is the PIR value by default?
- A. PIR=min(2*cir, 10240000)
- B. PIR=min(1.5*cir, 10240000)
- C. Nothing
- D. PIR=CIR
Answer: A
NEW QUESTION 54
How many channels of ADSL2+&POTS access services are provided by the MA5600T ADSL2+&POTS integrated service board H80BCAME?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 55
Is the following description correct? MA5600T/MA5680T supports VLAN tag conversion. When SVLANs with different attributes create service flows through service-port, if tag-transform is set to default, there is no difference in tag conversion rules.
- A. False
- B. True
Answer: A
NEW QUESTION 56
What are the incorrect statements about Type B protection for GPON networks?
- A. Support OLT inter-board and intra-board port combination protection pair
- B. Protection based on PON port and backbone fiber
- C. Service configuration data only needs to be configured to the main port, no need to configure two copies
- D. Switching trigger conditions: 1) branch fiber failure, 2) OLT single board failure, 3) component failure
Answer: D
NEW QUESTION 57
......
Latest H35-210_V2.5 Exam Dumps - Valid and Updated Dumps: https://realpdf.pass4suresvce.com/H35-210_V2.5-pass4sure-vce-dumps.html