Fortinet NSE7_OTS-6.4 Exam Prep Guide: Prep guide for the NSE7_OTS-6.4 Exam
2023 New Preparation Guide of Fortinet NSE7_OTS-6.4 Exam
For more information about the Fortinet NSE7_OTS-6.4 Exam visit the following reference link:
Fortinet NSE7_OTS-6.4 Exam's Reference link
NEW QUESTION # 11
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiGate for SD-WAN
- B. FortiSIEM for security incident and event management
- C. FortiEDR for endpoint detection
- D. FortiGate for application control and IPS
- E. FortiNAC for network access control
Answer: C,D,E
NEW QUESTION # 12
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?
- A. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
- B. In order to communicate, PLC1 must be in the same VLAN as PLC2.
- C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
- D. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
Answer: C
NEW QUESTION # 13
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Role-based authentication on FortiNAC
- B. Two-factor authentication on FortiAuthenticator
- C. FSSO authentication on FortiGate
- D. Local authentication on FortiGate
Answer: B,D
NEW QUESTION # 14
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiGate for SD-WAN
- B. FortiSIEM for security incident and event management
- C. FortiEDR for endpoint detection
- D. FortiGate for application control and IPS
- E. FortiNAC for network access control
Answer: B,D,E
NEW QUESTION # 15
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Black hat
- B. VLAN exploits
- C. Global hat
- D. Hard hat
- E. RTU exploits
Answer: A,B,E
NEW QUESTION # 16
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Adapter consolidation for multi-adapter hosts
- B. Importation and classification of hosts
- C. Enhanced point of connection details
- D. Direct VLAN assignment
Answer: C,D
NEW QUESTION # 17
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Black hat
- B. Hard hat
- C. VLAN exploits
- D. Global hat
- E. RTU exploits
Answer: A,B,E
NEW QUESTION # 18
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. All connected devices, each time they connect
- B. Rogue devices, each time they connect
- C. Rogue devices, only when they connect for the first time
- D. Known trusted devices, each time they change location
Answer: C
NEW QUESTION # 19
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. Each playbook can include multiple triggers.
- C. You must set correct operator in event handler to trigger an event.
- D. You can automate SOC tasks through playbooks.
Answer: C,D
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 20
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- C. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
- D. Create a notification policy and define a script/remediation on FortiSIEM.
Answer: D
Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 21
What can be assigned using network access control policies?
- A. FortiNAC device polling methods
- B. Layer 3 polling intervals
- C. Profiling rules
- D. Logical networks
Answer: C
NEW QUESTION # 22
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. SNMP
- B. TACACS
- C. API
- D. RADIUS
- E. ICMP
Answer: A,C,D
NEW QUESTION # 23
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- B. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- C. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- D. IT and OT networks are separated by segmentation.
Answer: B,D
NEW QUESTION # 24
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use a FortiAuthenticator.
- D. You must use a third-party RADIUS OTP server.
Answer: C
NEW QUESTION # 25
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. You must set correct operator in event handler to trigger an event.
- C. You can automate SOC tasks through playbooks.
- D. Each playbook can include multiple triggers.
Answer: C,D
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 26
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. IPS
- B. List
- C. Risk
- D. Overview
- E. Security
Answer: B,C,D
NEW QUESTION # 27
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiNAC determined the user by DHCP fingerprint method
- B. Two-factor authentication is not configured with RADIUS authentication method
- C. The user was determined by Security Fabric
- D. FortiGate determined the user by passive authentication
Answer: D
NEW QUESTION # 28
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)
- A. Highest to lowest priority defined in the firewall policy
- B. Destination defined as internet services in the firewall policy
- C. Source defined as internet services in the firewall policy
- D. Services defined in the firewall policy.
- E. Lowest to highest policy ID number
Answer: A,B,D
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
1. Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
2. Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
3. Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
Reference:
Fortinet NSE 7 - Enterprise Firewall 6.4 Study Guide, Chapter 4: Policy Implementation, page 4-18.
NEW QUESTION # 29
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiEDR
- B. FortiGate
- C. FortiNAC
- D. FortiSwitch
Answer: B
Explanation:
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 30
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Adapter consolidation for multi-adapter hosts
- B. Enhanced point of connection details
- C. Importation and classification of hosts
- D. Direct VLAN assignment
Answer: B,C
Explanation:
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 31
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM CMDB report
- B. A FortiAnalyzer device report
- C. A FortiSIEM incident report
- D. A FortiSIEM analytics report
Answer: A
NEW QUESTION # 32
......
Fortinet NSE7_OTS-6.4 is a certification exam that validates the skills and knowledge of network security professionals in the field of operational technology (OT) security. This exam is designed for individuals who are responsible for securing industrial control systems (ICS) and supervisory control and data acquisition (SCADA) systems. The Fortinet NSE7_OTS-6.4 exam is a part of Fortinet's Network Security Expert (NSE) program, which is a comprehensive training and certification program that provides in-depth knowledge of Fortinet products and solutions.
Latest Questions NSE7_OTS-6.4 Guide to Prepare Free Practice Tests: https://realpdf.pass4suresvce.com/NSE7_OTS-6.4-pass4sure-vce-dumps.html