
DES-DD33 Questions PDF [2022] Use Valid New dump to Clear Exam
Passing EMC DES-DD33 Exam Using 2022 Practice Tests
NEW QUESTION 19
A customer needs a backup system to protect 100 TB of mission-critical data.
What should be used to back up the system?
- A. DDVE
- B. cloud tier
- C. DD3300
- D. DD6900
Answer: B
NEW QUESTION 20
Which NDMP device is supported on a PowerProtect DD appliance?
- A. CIFS
- B. VTL
- C. NFS
- D. DD Boost
Answer: B
Explanation:
A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel; as an NDMP tape server over Ethernet; or as a disk target using application specific interfaces like DD Boost. DD VTL is qualified with leading open systems and IBMi enterprise backup applications.
NEW QUESTION 21
What is a characteristic of using replication with Dell EMC Cloud Tier?
- A. Cloud Tier is required to be configured on the source and destination systems
- B. Does not require that a file be recalled from the cloud on the source
- C. Always takes place between the source and destination cloud tier
- D. Always takes place between the source and destination active tier
Answer: D
NEW QUESTION 22
Which are supported compression algorithms in DDOS?
- A. lz, gz, and gzfast
- B. rle, lzw, and lz
- C. bmp, lz, and gz
- D. dsp, gz, and lz
Answer: A
Explanation:
Prior generation appliances compressed data using the default lz algorithm. Other types of compression algorithms such as gzfast and gz were also available.
NEW QUESTION 23
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. yes and nfs_rfc1323=1
- B. yes and nfs_rfc1323=0
- C. no and nfs_rfc1323=1
- D. no and nfs_rfc1323=0
Answer: A
NEW QUESTION 24
What happens to the data when it is moved from the active tier to cloud tier?
- A. It is compressed and stored as object storage in a new format
- B. It is compressed and stored in block storage in a new format
- C. It is deduplicated and stored in a file system in the native format
- D. It is deduplicated and stored in object storage in the native format
Answer: C
Explanation:
Every file has a meta-data. Meta-data of the files which is getting moved is stored on active tier and data and metadata is moved into the cloud. There is no multiple data-movement policy set on single mtree. Data moved to particular cloud unit depends on datamovement policy. And only the unique data is sent to the cloud. This is done using the deduplication.
NEW QUESTION 25
Where can daily information on system and MTree capacity be found?
- A. Message log
- B. Support Bundle
- C. DDSM Health Overview
- D. Autosupport report
Answer: D
NEW QUESTION 26
An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high.
What is the most likely cause of this behavior?
- A. Known segments
- B. Disk failure
- C. NVRAM failure
- D. Expired segments
Answer: A
NEW QUESTION 27
What information does the daily Autosupport report contain?
- A. Quota alerts and MTree capacity
- B. System and MTree capacity
- C. System and Quota alerts
- D. MTree capacity and System alerts
Answer: C
Explanation:
The autosupport command manages system reports. Command options enable administrative users to manage two reports that describe the state of a Data Domain system: the autosupport report and the daily alert summary.
NEW QUESTION 28
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?
- A. L6000
- B. L180
- C. TS3500
- D. L2000
Answer: C
NEW QUESTION 29
Following best practices for a PowerProtect DD CIFS environment, what is the recommended SESSTIMEOUT value in seconds?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
SESSTIMEOUT value from the default 45 seconds to 3600 seconds.
NEW QUESTION 30
A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GiB.
What is the minimum tape type to support this requirement?
- A. LTO-4
- B. LTO-5
- C. LTO-2
- D. LTO-3
Answer: A
NEW QUESTION 31
An administrator wants to integrate a PowerProtect DD appliance into their current backup environment using CIFS, NFS, DD Boost, and VTL.
Which backup applications support these protocols?
- A. Veritas NetBackup and Dell EMC NetWorker
- B. Dell EMC Avamar and Dell EMC NetWorker
- C. IBM Spectrum Protect and Veritas NetBackup
- D. Commvault Simpana and Veritas Backup Exec
Answer: A
NEW QUESTION 32
A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization. Upon further investigation, the administrator discovered expired files are still present on the appliance.
What is the most likely reason for this issue?
- A. Backup application failed to delete the file after expiration
- B. Retention Lock feature was disabled before the expiration date
- C. File system cleaning was disabled
- D. The atime of the file was set below the minimum retention period
Answer: A
NEW QUESTION 33
A backup administrator needs to implement BoostFS for Windows.
What do they need to install on the Windows server? (Choose all that apply.)
- A. CBFS
- B. FUSE
- C. CIFS
- D. NFS
Answer: C,D
Explanation:
For CIFS/NFS/DD BoostFS, the first consideration to address is what level of CIFS, NFS and DD BoostFS sharing is wanted for the DD series appliances.
NEW QUESTION 34
What are all the protocols that can be used to send data to a PowerProtect DD over Ethernet?
- A. DD Boost, VTL, CIFS, and NFS
- B. VTL, NFS, and NDMP
- C. NDMP, NFS, VTL, and CIFS
- D. CIFS, NFS, DD Boost, and NDMP
Answer: A
Explanation:
DD series can simultaneously support multiple access methods including NFS and/or CIFS, VTL, NDMP and DD Boost™ all applications and utilities can be supported in the same DD series at the same time to enable greater protection storage consolidation. A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel.
NEW QUESTION 35
Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?
- A. VTL
- B. CIFS
- C. DD Boost
- D. DDOS
Answer: D
Explanation:
The Data Invulnerability Architecture is built into DDOS and DD series to provide the industry's best defense against data loss.
NEW QUESTION 36
A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state.
As a best practice, at what percentage of disk utilization should action be taken?
- A. 80%
- B. 60%
- C. 70%
- D. 95%
Answer: A
NEW QUESTION 37
......
DES-DD33 Study Guide Brilliant DES-DD33 Exam Dumps PDF: https://realpdf.pass4suresvce.com/DES-DD33-pass4sure-vce-dumps.html